TireFitLab

215/70 R15

What size is 215/70 R15?

215/70 R15 has an overall diameter of about 26.85 in, a section width of 8.46 in and a sidewall height of 5.93 in. It turns roughly 751 times per mile. Below are the exact figures plus plus/minus sizes that stay within the selected diameter tolerance.

Geometric comparison

245/35 R20 stays within the configured tolerance for 215/70 R15: -0.4% diameter and -0.4% speedometer effect.

Geometric comparison
Metric This size: 215/70 R15 Alternative: 245/35 R20 Difference Verdict
Overall diameter 26.85 in 26.75 in -0.4% Within tolerance
Section width 8.46 in 9.65 in +1.18 in Computed difference
Sidewall height 5.93 in 3.38 in -2.55 in Computed difference
Circumference 84.35 in 84.04 in -0.4% Within tolerance
Speedo 0.0% -0.4% -0.4% Within tolerance

Seasonal check

Planning a long summer drive?

Use the budget and running-cost tools before a trip, especially if the current tires are worn or the replacement size changes diameter.

Estimate tire budget

What this geometry means

215/70 R15 has a taller-sidewall proportion. The marking combines nominal section width 8.46 in, sidewall ratio 70% and rim diameter 15 inches. One sidewall is 5.93 in; both sidewalls make up 44% of the 26.85 in overall diameter, while the rim makes up 56%.

Curated alternatives: 12 sizes, spanning -0.8% to +1.2% in nominal diameter versus 215/70 R15.

Width endpoints in that set are 215/65 R16 (+0.00 in) and 255/45 R18 (+1.57 in) relative to 215/70 R15.

At the nominal 84.35 in circumference, 1,000 rotations cover 2.14 km (1.33 mi); the inverse rates are 467/km and 751/mi.

The closest diameter entry is 245/35 R20 at -0.4%. Relative to 215/70 R15, it changes nominal section width by +1.18 in, each sidewall by -2.55 in and radius by -0.05 in.

Section-width mix versus 215/70 R15: 0 narrower, 2 equal-width and 10 wider entries.

This is a nominal geometry comparison only. Vehicle clearance, wheel width and offset, load and speed ratings, and manufacturer approval still require separate checks.

Specification

Specification
Overall diameter 26.85 in
Section width 8.46 in
Sidewall height 5.93 in
Circumference 84.35 in
Revolutions 467 /km · 751 /mi

In-tolerance sizes

Alternative sizes that stay within the selected diameter tolerance:

In-tolerance sizes
Size Diameter Speedo Verdict
245/35 R20 -0.4% -0.4% ✓ OK
225/55 R17 -0.4% -0.4% ✓ OK
245/40 R19 -0.5% -0.5% ✓ OK
215/65 R16 +0.6% +0.6% ✓ OK
245/45 R18 -0.6% -0.6% ✓ OK
255/35 R20 +0.7% +0.7% ✓ OK
255/40 R19 +0.7% +0.7% ✓ OK
255/45 R18 +0.7% +0.7% ✓ OK
225/60 R16 -0.8% -0.8% ✓ OK
235/60 R16 +0.9% +0.9% ✓ OK
215/60 R17 +1.1% +1.1% ✓ OK
235/55 R17 +1.2% +1.2% ✓ OK

Compare sizes

Looks valid
Looks valid
Units
Not recommendedWithin tolerance · Diameter -0.4% (-0.10 in) · US (~3%)
  • Not recommended · This rating covers tire geometry only, not vehicle compatibility.
  • Diameter -0.4% · Ride-height change -0.05 in.
  • Speedometer reads high · 60 mph → 59.8 mph.
  • Sidewall -2.55 in · Width +1.18 in.
Diameter-0.4%-0.10 in
Speedo @ 60-0.4%60 mph → 59.8 mph
Sidewall-2.55 inWidth +1.18 in
Ride-height change-0.05 inDiameter ÷ 2
How this result is calculated

Computed from nominal tire-size geometry: diameter, circumference and speedometer error. It does not check vehicle placard approval, load/speed rating, rim-width range, wheel-arch, suspension or brake clearance.

Methodology

Before fitting

  • Check the vehicle placard and owner’s manual first.
  • Match or exceed the required load index and speed rating.
  • Confirm rim-width range, bolt pattern, hub bore, offset and fasteners.
  • Inspect wheel-arch, suspension and brake clearance under real vehicle load.
  • Check TPMS, cold pressure and local roadworthiness rules.
Diameter
26.85 in 26.75 in-0.10 in
Sidewall
5.93 in 3.38 in-2.55 in
Width
8.46 in 9.65 in+1.18 in
Circumference
84.35 in 84.04 in-0.4%
Revs / mile
751 754
Speedo @ 60
60 mph 59.8 mph-0.4%
Ride-height change
0.00 in -0.05 in
True distance per 100 indicated
100 mi 99.6 mi-0.4%
Δ⌀ -0.10 inΔ↔ +1.18 in
  • Current — 215/70 R15
  • New — 245/35 R20
  • Grounded to the road: the axle rises -0.05 in.

Result report

215/70 R15 245/35 R20 · Not recommended · Within tolerance

Copy/print uses this page state only; TireFitLab does not create an account or store a server-side report.

Embed or cite this result
Open embed preview

Geometric estimate. Always verify physical clearance (arches, suspension, brakes) before fitting.

In-tolerance alternative sizes

In-tolerance alternative sizes
SizeDiameterSpeedo @ 100Use this
OE 215/70R15+0.0%+0.0%

More tools

Last reviewed: 2026-07-22

Technical check
2026-07-22
Content updated
2026-07-22
What changed
  • Added a localized engine-derived geometry signature and matching Markdown narrative.
Methodology