TireFitLab

255/50 R19

What size is 255/50 R19?

255/50 R19 has an overall diameter of about 29.04 in, a section width of 10.04 in and a sidewall height of 5.02 in. It turns roughly 695 times per mile. Below are the exact figures plus plus/minus sizes that stay within the selected diameter tolerance.

Geometric comparison

255/45 R20 stays within the configured tolerance for 255/50 R19: 0.0% diameter and 0.0% speedometer effect.

Geometric comparison
Metric This size: 255/50 R19 Alternative: 255/45 R20 Difference Verdict
Overall diameter 29.04 in 29.04 in 0.0% Within tolerance
Section width 10.04 in 10.04 in 0.00 in Computed difference
Sidewall height 5.02 in 4.52 in -0.50 in Computed difference
Circumference 91.23 in 91.22 in 0.0% Within tolerance
Speedo 0.0% 0.0% 0.0% Within tolerance

Seasonal check

Planning a long summer drive?

Use the budget and running-cost tools before a trip, especially if the current tires are worn or the replacement size changes diameter.

Estimate tire budget

What this geometry means

255/50 R19 has a mid-range sidewall proportion. The marking combines nominal section width 10.04 in, sidewall ratio 50% and rim diameter 19 inches. One sidewall is 5.02 in; both sidewalls make up 35% of the 29.04 in overall diameter, while the rim makes up 65%.

At the nominal 91.23 in circumference, 1,000 rotations cover 2.32 km (1.44 mi); the inverse rates are 432/km and 695/mi.

Section-width mix versus 255/50 R19: 4 narrower, 2 equal-width and 6 wider entries.

The closest diameter entry is 255/45 R20 at -0.0%. Relative to 255/50 R19, it changes nominal section width by +0.00 in, each sidewall by -0.50 in and radius by -0.00 in.

Curated alternatives: 12 sizes, spanning -1.3% to +1.2% in nominal diameter versus 255/50 R19.

Width endpoints in that set are 235/65 R17 (-0.79 in) and 295/40 R20 (+1.57 in) relative to 255/50 R19.

This is a nominal geometry comparison only. Vehicle clearance, wheel width and offset, load and speed ratings, and manufacturer approval still require separate checks.

Specification

Specification
Overall diameter 29.04 in
Section width 10.04 in
Sidewall height 5.02 in
Circumference 91.23 in
Revolutions 432 /km · 695 /mi

In-tolerance sizes

Alternative sizes that stay within the selected diameter tolerance:

In-tolerance sizes
Size Diameter Speedo Verdict
255/45 R20 -0.0% -0.0% ✓ OK
255/55 R18 +0.0% +0.0% ✓ OK
235/65 R17 -0.0% -0.0% ✓ OK
285/45 R19 +0.2% +0.2% ✓ OK
235/60 R18 +0.2% +0.2% ✓ OK
295/35 R21 +0.3% +0.3% ✓ OK
235/55 R19 +0.5% +0.5% ✓ OK
295/40 R20 +0.9% +0.9% ✓ OK
275/45 R19 -1.0% -1.0% ✓ OK
265/45 R20 +1.2% +1.2% ✓ OK
245/45 R20 -1.2% -1.2% ✓ OK
275/40 R20 -1.3% -1.3% ✓ OK

Compare sizes

Looks valid
Looks valid
Units
Requires verificationWithin tolerance · Diameter -0.0% (-0.00 in) · US (~3%)
  • Requires verification · This rating covers tire geometry only, not vehicle compatibility.
  • Diameter -0.0% · Ride-height change -0.00 in.
  • Speedometer unchanged · 60 mph → 60.0 mph.
  • Sidewall -0.50 in · Width +0.00 in.
Diameter-0.0%-0.00 in
Speedo @ 60-0.0%60 mph → 60.0 mph
Sidewall-0.50 inWidth +0.00 in
Ride-height change-0.00 inDiameter ÷ 2
How this result is calculated

Computed from nominal tire-size geometry: diameter, circumference and speedometer error. It does not check vehicle placard approval, load/speed rating, rim-width range, wheel-arch, suspension or brake clearance.

Methodology

Before fitting

  • Check the vehicle placard and owner’s manual first.
  • Match or exceed the required load index and speed rating.
  • Confirm rim-width range, bolt pattern, hub bore, offset and fasteners.
  • Inspect wheel-arch, suspension and brake clearance under real vehicle load.
  • Check TPMS, cold pressure and local roadworthiness rules.
Diameter
29.04 in 29.04 in-0.00 in
Sidewall
5.02 in 4.52 in-0.50 in
Width
10.04 in 10.04 in+0.00 in
Circumference
91.23 in 91.22 in-0.0%
Revs / mile
695 695
Speedo @ 60
60 mph 60.0 mph-0.0%
Ride-height change
0.00 in -0.00 in
True distance per 100 indicated
100 mi 100.0 mi-0.0%
Δ⌀ -0.00 inΔ↔ +0.00 in
  • Current — 255/50 R19
  • New — 255/45 R20
  • Grounded to the road: the axle rises -0.00 in.

Result report

255/50 R19 255/45 R20 · Requires verification · Within tolerance

Plan budget for this size: 255/45 R20

Copy/print uses this page state only; TireFitLab does not create an account or store a server-side report.

Plan budget for this size
Embed or cite this result
Open embed preview
Budget$150–$210Per tireMid-range$195–$280Per tirePremium$280–$395Per tire

Geometric estimate. Always verify physical clearance (arches, suspension, brakes) before fitting.

In-tolerance alternative sizes

In-tolerance alternative sizes
SizeDiameterSpeedo @ 100Use this
−1″ 255/55R18+0.0%+0.0%
OE 255/50R19+0.0%+0.0%
+1″ 255/45R20-0.0%-0.0%

More tools

Last reviewed: 2026-07-22

Technical check
2026-07-22
Content updated
2026-07-22
What changed
  • Added a localized engine-derived geometry signature and matching Markdown narrative.
Methodology